Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (HL-L3280CDWHL-L8240CDW)
Settings Tables (HL-L3280CDW/HL-L8240CDW)
[Settings]
[Settings]
Level 2 | Level 3 | Level 4 | Descriptions |
---|---|---|---|
Toner | Toner Life | - | View the approximate remaining toner life. |
Test Print | - | Print a test page. | |
Colour Correction | Correction Start | Initiate colour calibration to check and correct colours. | |
Reset | Reset the calibration parameters to the default settings. | ||
Toner Cartridge Check | Black | View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine. | |
Magenta | |||
Cyan | |||
Yellow | |||
Network | Wired LAN | - | Access the Wired LAN setting menus. |
WLAN(Wi-Fi) | - | Access the WLAN setting menus. | |
Wi-Fi Direct | - | - | Access the Wi-Fi Direct setting menus. |
Tray Setting | - | - | Access the tray setting menus. |
Eco Mode | - | - | |
All Settings | - | - | Configure the detailed settings. |
[General Setup]
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Tray Setting | Paper Type | MP Tray (HL-L8240CDW) | - | Select the paper type that matches the paper in the MP tray. |
Tray 1 | - | Select the paper type that matches the paper in the standard paper tray. | ||
Tray 2 *1 (HL-L8240CDW) | - | Select the paper type that matches the paper in the Optional Tray (Tray 2). | ||
Paper Size | MP Tray (HL-L8240CDW) | - | Select the paper size you loaded in the MP tray. | |
Tray 1 | - | Select the paper size you loaded in the standard paper tray. | ||
Tray 2 *1 (HL-L8240CDW) | - | Select the paper size you loaded in the Optional Tray (Tray 2). | ||
Manual Feed (HL-L3280CDW) | - | - | Select whether to print from the Manual Feed Slot. | |
Tray Use (HL-L8240CDW) | - | - | Select the paper tray you want to use. | |
Priority (HL-L8240CDW) | - | - | When the Auto option is selected in the Tray Use menu, select the order in which the machine uses paper trays that contain paper of the same size. | |
Print Position | MP Tray (HL-L8240CDW) | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | |
Y Offset | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | |||
Tray 1 | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | ||
Y Offset | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | |||
Tray 2 *1 (HL-L8240CDW) | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | ||
Y Offset | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | |||
Skip Tray (HL-L8240CDW) | - | - | Select a specific tray to skip if you know it is loaded with the wrong size paper. | |
Separator Tray (HL-L8240CDW) | - | - | Select the tray that contains the paper used as the separator paper, which is inserted between each print job. | |
Check Paper | - | - | Select whether or not to display a message indicating you must check the paper type and paper size when you pull a paper tray out of the machine. | |
LCD Settings | Backlight | - | - | Adjust the brightness of the LCD backlight. |
Dim Timer | - | - | Set how long the LCD backlight stays on after the last finger press. | |
Screen Settings | Display Information | IP Address | - | Select whether to display your machine's IP Address on the Home screen. |
Ecology | Eco Mode | - | - | |
Toner Save | - | - | Increase the page yield of the toner cartridge. | |
Sleep Time | - | - | Set how much time should pass before the machine enters Power Saving mode. | |
Quiet Mode | - | - | Decrease printing noise. | |
Auto Power Off | - | - | Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. | |
Setting Lock | Set Password | - | - | Restrict unauthorised users from changing the machine’s settings. |
Lock Off⇒On | - | - | ||
New Password (Available only when you enter the password for the first time.) | - | - | ||
Interface | Select | - | - | Select the interface to use. If you select the Auto option, the machine changes the interface to USB or network depending on which interface is receiving data. |
Auto IF Time | - | - | Set the time-out period for the auto interface selection. | |
Input Buffer | - | - | Increase or decrease the input buffer capacity. | |
Delete Storage | Macro ID | - | - | Delete the registered Macro data. |
Stream ID | - | - | Delete the registered Stream data. | |
Font ID | - | - | Delete the registered Font data. | |
Delete All | - | - | Restore your machine's Macro/Stream and Font data to the factory settings. |
[Printer]
Level 3 | Level 4 | Level 5 | Descriptions |
---|---|---|---|
Emulation | - | - | Choose the emulation mode. |
Quality | - | - | Select the print quality. |
Print Options | Font List | HP LaserJet | Print the font list and samples of HP LaserJet. |
BR-Script 3 | Print the font list and samples of BR-Script. | ||
Test Print | - | Print the test page. | |
2-sided | 2-sided Print | - | Select whether to print on both sides of the paper. |
Single Image | - | For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. When you use preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for preprinted paper, the last page will be printed on the reverse side. | |
Auto Continue | - | - | Select this setting if you want the machine to clear paper size errors or media type errors, and use paper from other trays. |
Output Colour | - | - | Set the output colour. |
Paper Type | - | - | Set the paper type. |
Paper Size | - | - | Set the paper size. |
Copies | - | - | Set the number of printed pages. |
Orientation | - | - | Set pages to print in either portrait or landscape orientation. |
Edge Emphasis | - | - | Make the text appear sharper. |
Print Position | MP Tray (HL-L8240CDW) | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. |
Y Offset (HL-L8240CDW) | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | ||
Tray 1 | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | |
Y Offset | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | ||
Tray 2 (HL-L8240CDW) | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | |
Y Offset (HL-L8240CDW) | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | ||
Auto FF | - | - | Allow the machine to print any remaining data automatically. |
HP LaserJet | Font No. | Font No. | Set the font number. |
Soft Font No. | Set the soft font number. This menu appears if a soft font is installed on your Brother machine. | ||
Font Pitch | - | Set the font pitch. (Available only for certain fonts.) | |
Font Point | - | Set the font size. (Available only for certain fonts.) | |
Symbol Set | - | Select the symbol or character set. | |
Table Print | - | Print the code table. | |
Auto LF | - | ON: CR -> CR+LF, OFF: CR -> CR | |
Auto CR | - | ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR OFF: LF -> LF, FF -> FF, or VT -> VT | |
Auto WRAP | - | Select whether you want a line feed and carriage return when the carriage position reaches the right margin. | |
Auto SKIP | - | Select whether you want a line feed and carriage return when the carriage position reaches the bottom margin. | |
Left Margin | - | Set the left margin at column 0 to 70 columns at 1 cpi. | |
Right Margin | - | Set the right margin at column 10 to 80 columns at 1 cpi. | |
Top Margin | - | Set the top margin distance from the top edge of the paper. | |
Bottom Margin | - | Set the bottom margin distance from the bottom edge of the paper. | |
Lines | - | Set the number of lines on each page. | |
Tray Command | - | Select this setting if a tray mismatch appears when you use the HP drivers. | |
BR-Script 3 | Error Print | - | Choose whether the machine prints the error information when errors occur. |
CAPT | - | Use CAPT (Colour Advanced Printing Technology) for optimal print quality when printing a PS file created by a non-Brother PS driver. Colours and photos appear clearer and more accurate. Print speed will be slower. | |
Multiple Page | - | Set the page layout when printing multiple pages. | |
PDF Print Options | - | Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text. | |
PDF Fit to Page | - | Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size. | |
Carbon Menu (HL-L8240CDW) | Carbon Copy | - | Enable or disable the Carbon Copy function. |
Copies | - | Set the number of printed pages. | |
Copy1 Tray | - | Select the tray you use for Copy1. | |
Copy1 Stream | - | Select a stream for Copy1. | |
Copy2 Tray ...Copy8 Tray | - | Select the tray you use for Copy2 to Copy8. | |
Copy2 Stream ...Copy8 Stream | - | Select a stream for Copy2 to 8. | |
Colour Correction | Correction Start | - | Initiate colour calibration to check and correct colours. |
Reset | - | Reset the calibration parameters to the default settings. | |
Auto Correction | - | Set the machine to perform Colour Calibration and Registration automatically. | |
Colour Settings | Setting Mode | Select whether to apply the colour print settings of the machine or the printer driver. | |
Colour Mode | Select the colour mode. | ||
Improve Gray Colour | Turn on or off to improve the image quality of shaded areas. | ||
Enhance Black Printing | Turn on or off if a black graphic does not print correctly. | ||
Brightness | Adjust the brightness. | ||
Contrast | Adjust the contrast. | ||
Red | Adjust the red colour. | ||
Green | Adjust the green colour. | ||
Blue | Adjust the blue colour. | ||
Reset Printer | - | - | Restore the machine settings to the factory settings. |
[Network]
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Wired LAN | TCP/IP | Boot Method | - | Choose the IP method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the primary DNS server's IP address. | ||
Secondary | Specify the secondary DNS server's IP address. | |||
APIPA | - | Allocate the IP address from the link-local address range automatically *1. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Ethernet | - | - | Choose the Ethernet link mode. | |
Wired Status | - | - | Display the wired network connection status. | |
MAC Address | - | - | Display your machine's MAC address. | |
Set to Default | - | - | Restore your machine's wired network settings to the factory settings. | |
Wired Enable | - | - | Turn the wired interface on or off. | |
WLAN(Wi-Fi) | Find Wi-Fi Network | - | - | Configure your wireless network settings manually. |
TCP/IP | Boot Method | - | Choose the IP method that best suits your needs. | |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the primary DNS server's IP address. | ||
Secondary | Specify the secondary DNS server's IP address. | |||
APIPA | - | Allocate the IP address from the link-local address range automatically *1. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
WPS/Push Button | - | - | Configure your wireless network settings using the one-button push method. | |
WPS/PIN Code | - | - | Configure the wireless network settings using WPS with a PIN code. | |
WLAN Status | Status | - | Display the wireless network connection status. | |
Signal | - | Display the wireless network signal strength. | ||
SSID | - | Display the wireless SSID (Network Name). | ||
Comm. Mode | - | Display the current Communication mode. | ||
MAC Address | - | - | Display your machine's MAC address. | |
Set to Default | - | - | Restore your machine's wireless network settings to the factory settings. | |
WLAN Enable | - | - | Turn the wireless interface on or off. | |
Wi-Fi Direct | Manual | - | - | Configure your Wi-Fi Direct network settings manually. |
Group Owner | - | - | Set your machine as the Group Owner. | |
Push Button | - | - | Configure your Wi-Fi Direct network settings using the one-button push method quickly. | |
PIN Code | - | - | Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly. | |
Device Information | Device Name | - | View your machine's device name. | |
SSID | - | Display the Group Owner's SSID (Network Name). | ||
IP Address | - | Display your machine's IP Address. | ||
Status Information | Status | - | Display the Wi-Fi Direct network status. | |
Signal | - | Display the current Wi-Fi Direct network signal strength. | ||
I/F Enable | - | - | Enable or disable the Wi-Fi Direct connection. | |
NFC (HL-L8240CDW) | - | - | - | Turn the NFC function on or off. |
Web Connect Settings | Proxy Settings | Proxy Connection | - | Change the web connection settings. |
Address | - | |||
Port | - | |||
User Name | - | |||
Password | - | |||
Web Based Mgmt | - | - | - | Enable or disable Web Based Management. If you enable this function, make sure you specify the connection method to use Web Based Management. |
IPsec | - | - | - | IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting. |
Global Detect | Allow Detect | - | - | Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network. |
Reject Access | - | - | Disable connections to the global network. | |
Network Reset | - | - | - | Restore all network settings of your machine to the factory settings. |
[Print Reports]
Level 3 | Descriptions |
---|---|
Printer Settings | Print the Printer Settings page. |
Network Configuration | Print the Network Configuration Report. |
Print File List | Print a list of data saved in the memory. |
Drum Dot Print | Print the Drum Dot Check Sheet. |
WLAN Report | Print the wireless connection diagnostics report. |
[Machine Information]
Level 3 | Level 4 | Descriptions |
---|---|---|
Serial No. | - | Display the machine's serial number. |
Firmware Version | Main Version | Check your machine's firmware version. |
Sub3 Version | ||
Security Version | ||
Firmware Update | - | Update your machine's firmware to the latest version. |
Firmware Auto Check | - | View firmware information on the Home screen. |
Page Counter | Total | Display the total number of printed pages. |
Colour | Display the total colour printed pages. | |
Black and White | Display the total monochrome printed pages. | |
Parts Life *1 | Drum | Display the remaining life of each drum unit. |
Belt | Display the remaining life of the belt unit. | |
Fuser | Display the remaining life of the fuser unit. | |
PF Kit MP (HL-L8240CDW) | Display the remaining life of the PF Kit MP. |
[Initial Setup]
Level 3 | Level 4 | Descriptions |
---|---|---|
Reset | Machine Reset | Restore all the machine's settings that you have changed, such as Paper Type. |
Network Reset | Restore all network settings of your machine to the factory settings. | |
Factory Reset | Reset the machine and restore the printer settings (including command settings) to the factory settings. | |
Local Language | - | Select the LCD language for your country. |