Search

Site Map

Network Reset

Use the Network Reset function to restore the print server's network settings, such as password and IP address, back to its default factory settings.
  • Unplug all the interface cables before you perform a Network Reset.

HL-L3210CW/HL-L3230CDN/HL-L3230CDW

  1. Press image or image to select the [Initial Setup] option, and then press OK.
  2. Press image or image to select the [Reset] option, and then press OK.
  3. Press image or image to select the [Network Reset] option, and then press OK.
  4. Press image to select [Reset].
  5. Press image to restart the machine.

HL-L3270CDW

  1. Press image[Settings]>[All Settings]>[Initial Setup]>[Reset]>[Network Reset].
  2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the process.
    Option
    Description
    Press Yes for 2 seconds

    Reboot the machine. The machine will begin the reset.

    No

    The machine will exit without rebooting.

    image
    If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
  3. Press image.
Related Information
Did you find the information you needed?

find moreaccept