The SecureEasySetup™ software allows you to configure the wireless network easier than configuring it manually. By pushing a button on the wireless router or access point, you can complete setup and secure the wireless network. Your router or access point must also support SecureEasySetup™. See Using the SecureEasySetup™ software to configure your printer for a wireless network.
WLAN Status
•
Status
This field displays the current wireless network status; Active (11b), Active (11g), Wired LAN Active, WLAN OFF or Connection NG.
1
Press the + or - button to select LAN. Press OK.
2
Press the + or - button to select WLAN. Press OK.
3
Press the + or - button to select WLAN Status. Press OK.
4
Press the + or - button to select Status. Press OK.
5
The current wireless network status will be displayed; Active (11b), Active (11g), Wired LAN Active, WLAN OFF or Connection NG
6
Press back.
•
Signal
This field displays the current wireless network signal strength; Strong, Medium, Weak or None.
1
Press the + or - button to select LAN. Press OK.
2
Press the + or - button to select WLAN. Press OK.
3
Press the + or - button to select WLAN Status. Press OK.
4
Press the + or - button to select Signal. Press OK.
5
The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
6
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
•
SSID
This field displays the current wireless network SSID.
1
Press the + or - button to select LAN. Press OK.
2
Press the + or - button to select WLAN. Press OK.
3
Press the + or - button to select WLAN Status. Press OK.
4
Press the + or - button to select SSID. Press OK.
5
The current wireless network SSID will be displayed.
6
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
•
Comm. Mode
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
1
Press the + or - button to select LAN. Press OK.
2
Press the + or - button to select WLAN. Press OK.
3
Press the + or - button to select WLAN Status. Press OK.
4
Press the + or - button to select Comm. Mode. Press OK.
5
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
6
Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.
Set to Default
You can restore the WLAN menu settings to factory default.
WLAN Enable
You can enable and disable the wireless network connection by selecting On or Off.
Note