When you use the Menu keys (+, -, OK or Back), remember the following basic steps:
• | If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready. |
• | When you press OK to choose a setting, Accepted appears on the LCD. After that, the LCD returns to the previous menu level. |
• | When you press Go to choose a setting, Accepted appears on the LCD. After that, the LCD returns to the Ready state. |
• | After changing the status or a setting, pressing Back before you press OK will cause the LCD to return to the previous menu level with the original settings unchanged. |
• | There are two ways to input numbers. You can press + or - to scroll up or down one number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you can change. |
For example: If you want to choose the paper size for Tray 1, as follows.
1 | Press any of the Menu buttons (+, -, OK or Back) to take the printer offline. Ready |
Machine Info. |
|
2 | Press + or - to choose Paper Tray. Paper Tray |
|
3 | Press OK to move to the next menu level. Manual Feed |
|
4 | Press + or - to choose Tray1 Size. Tray1 Size |
|
5 | Press OK to move to the next menu level. Any |
|
6 | Press + or - to choose the paper size. A4 |
|
7 | Press OK or Go. Accepted appears on the LCD. Accepted |
|