![]() ![]() | ![]() ![]() |
1 | Put the document face up in the ADF, or face down on the scanner glass. |
2 | Press ![]() |
3 | Press ![]() ![]() Press OK. If your machine is an MFC-9440CN, MFC-9450CDN, DCP-9040CN or DCP-9042CDN, go to Step 5. If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step 4. |
4 | Press ![]() ![]() |
5 | Press ![]() ![]() Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh® on the control panel. Press OK. |
6 | Press Black Start or Color Start. The machine starts the scanning process. |
• | Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change the settings. |
• | If you want the scanned data in color, choose color in the scan type on the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type on the Device Button tab of the ControlCenter2 configuration. (See File.) |
• | If you would like to change the file name of scanned documents, enter the file name in File Name section on the Device Button tab of the ControlCenter2 configuration. |
![]() ![]() | ![]() ![]() |