When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
® you designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
® (Presto!
® PageManager
®) and convert your document into text for viewing and editing from a word processing application on the designated Macintosh
®. You can change the Scan configuration. (See
OCR (word processing application).)
1 | Put the document face up in the ADF, or face down on the scanner glass. |
2 | Press ![Graphic](images/scan_key.gif) ( Scan). |
3 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose Scan to OCR. Press OK. If your machine is an MFC-9440CN, MFC-9450CDN, DCP-9040CN or DCP-9042CDN, go to Step 5. If your machine is an MFC-9840CDW or DCP-9045CDN, go to Step 4. |
4 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK. ![Note](../img/icon_note.gif) Note | If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout. |
|
5 | Press ![Bsymbol.utri](../img/bsymbol_utri.gif) or ![Bsymbol.dtri](../img/bsymbol_dtri.gif) to choose the destination Macintosh ® you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh® on the control panel. Press OK. |
6 | Press Black Start or Color Start. The machine starts the scanning process. |
![Note](../img/icon_note.gif)
Note
| Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change the settings. |