Scan to FTP Manual Method

Put the document face up in the ADF, or face down on the scanner glass.

Press

(Scan).

Press

to choose Scan to FTP. Press OK.

Press

to choose <Manual>. Press OK.

Note

If there is no FTP Profile configured, skip Step 4 and go to Step 5.

Use the dial pad to enter the FTP host address (for example ftp.example.com’ Up to 60 characters) or the IP address (for example 192.23.56.189).

Press OK.

Use the dial pad to enter the destination folder (for example /brother/abc/, up to 60 characters).

Press OK.

Press

to choose Enter Username or Change Setting. Press OK.

If you choose Enter Username, go to Step 11.

If you choose Change Setting, go to Step 8.

Choose one of the options below.

•	Press or to choose Color 150 dpi, Color 300 dpi or Color 600 dpi. Press OK and go to Step 9.
•	Press or to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to Step 10.

Press

to choose PDF or JPEG. Press OK.

Press

to choose PDF or TIFF. Press OK.

Use the dial pad to enter the username. Press OK.

Use the dial pad to enter the password. Press OK.

Do one of the following:

•	If you want to start scanning, press Black Start or Color Start and go to Step 16.
•	If you want to change the file name, go to Step 14.

Press

to choose a file name you want to use and press OK. Press Black Start or Color Start and go to Step 16.

Note

If you want to change the file name manually, go to step 15

Press

to choose <Manual>. Press OK.

Enter the file name you want to use (up to 15 characters) and press OK.

Press Black Start or Color Start.

The LCD shows Connecting. When the connection to the FTP server is successful the machine starts the scanning process.

Note

•	If a timeout or any other error occurs, start the Scan to FTP process again from the beginning 1. If the username is entered incorrectly then the LCD will show Authenticate Err, please start the process again from the beginning 1.
•	Scan type depends on the settings, Black Start or Color Start do not change the settings.