When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh you designated on your network. The ControlCenter2 will launch the Presto! PageManager and convert your document into text that can be viewed and edited from a word processing application on the designated Macintosh.
| 1 | Load your document. |
| 2 | Press the  ( Scan) key. |
| 3 | Press  or  to choose Scan to OCR. Press OK. |
| 4 | Press or to choose the destination Macintosh you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh on the control panel. Press OK.  Note | | For DCP models, press or repeatedly to enter the first digit of the PIN number. Press  to move the cursor, then use or to enter the second digit. Repeat until you have entered all four digits of the PIN number. Press OK. |
|
| 5 | Press Black Start or Color Start. The machine starts the scanning process. |
Note
| • | Presto! PageManager must be installed on your Macintosh. |
| • | You can’t choose color Scan type for this function. Black Start or Color Start do not change the settings. |
