ScantoImage

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the default graphics application on the designated Macintosh. You can change the Scan configuration. (See Image (example: Apple Preview).)

Load your document.

Press the

(Scan) key.

Press

to choose Scan to Image.

Press OK.

Press

to choose the destination Macintosh you want to send to.

Press OK.

If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh on the control panel.

Press OK.

Note

For DCP models, press

repeatedly to enter the first digit of the PIN number. Press

to move the cursor, then use

to enter the second digit. Repeat until you have entered all four digits of the PIN number. Press OK.

Press Black Start or Color Start.

The machine starts the scanning process.

Note

•	If you want to change between color and black and white scanning, choose color or black and white in the scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See SCAN.)
•	Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change the settings.

Page Top