Search

Site Map

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Print Head Using Web Based Management

Clean the Print Head Using Web Based Management

To maintain good print quality, the machine automatically cleans the print head when needed. If there is a print quality problem, start the cleaning process manually.
  1. Start Web Based Management. See Access Web Based Management.
  2. In the left navigation bar, select General>Print Head Cleaning.
    image
    If the left navigation bar is not visible, start navigating from image.
  3. Select the Normal, Strong, or Strongest option for the cleaning strength you want. The Special option uses the most power in cleaning the print head, but also consumes the most ink.
  4. Select Start.
    image
    • The Special option requires a large amount of ink to clean the print head. Refill all ink tank levels to more than half before starting the print head cleaning.
    • Use the Special option only if you previously used the Strongest option and the print quality did not improve.
    • If you start the cleaning with low ink amount, it may cause damage to the machine. Check each ink tank level before starting the cleaning and refill each ink tank as necessary.
  5. Select Yes.
    The machine starts cleaning.
image
(Windows) You can also clean the print head using the printer driver.
Related Information
Did you find the information you needed?

find moreaccept