Search

Site Map

Set the Date and Time

(MFC models)

The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.

(DCP models)

If the machine's power has been off, the machine's date and time may not be current. Re-enter them.

  1. Press image [Settings].
  2. Press image[Date & Time].
  3. Press [Date].
  4. Enter the last two digits of the year on the touchscreen, and then press [OK].
  5. Enter two digits for the month on the touchscreen, and then press [OK].
  6. Enter two digits for the day on the touchscreen, and then press [OK].
  7. Press [Clock Type].
  8. Press [12h Clock] or [24h Clock].
  9. Press [Time].
  10. To enter the time, do one of the following:
    • If you selected [12h Clock], enter the time (in 12-hour format) using the touchscreen, and then press [AM] or [PM].

      Press [OK].

    • If you selected [24h Clock], enter the time (in 24-hour format) using the touchscreen.

      Press [OK].

      (For example, enter 19:45 for 7:45 PM.)

  11. Press image.
Related Information
Was this page helpful?

Yes

No

find moreaccept