Search

Site Map

Configure IPsec Using Web Based Management

The IPsec connection conditions are comprised of two Template types: Address and IPsec. You can configure up to 10 connection conditions.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If the machine prompts you for a password, type it, and then click image.
  4. Click the Network tab.
  5. Click the Security tab.
  6. Click the IPsec menu in the left navigation bar.
  7. Configure the settings.
    Option Description
    Status

    Enable or disable IPsec.

    Negotiation Mode

    Select Negotiation Mode for IKE Phase 1. IKE is a protocol that is used to exchange encryption keys in order to carry out encrypted communication using IPsec.

    In Main mode, the processing speed is slow, but the security is high. In Aggressive mode, the processing speed is faster than Main mode, but the security is lower.

    All Non-IPsec Traffic

    Select the action to be taken for non-IPsec packets.

    When using Web Services, you must select Allow for All Non-IPsec Traffic. If you select Drop, Web Services cannot be used.

    Broadcast/Multicast Bypass

    Select Enabled or Disabled.

    Protocol Bypass

    Select the check box for the option or options you want.

    Rules

    Select the Enabled check box to activate the template. When you select multiple check boxes, the lower numbered check boxes have priority if the settings for the selected check boxes conflict.

    Click on the corresponding drop-down list to select the Address Template that is used for the IPsec connection conditions. To add an Address Template, click Add Template.

    Click on the corresponding drop-down list to select the IPsec Template that is used for the IPsec connection conditions. To add an IPsec Template, click Add Template.

  8. Click Submit.

    If the machine must be restarted to register the new settings, the restart confirmation screen will appear.

    If there is a blank item in the template you enabled in the Rules table, an error message appears. Confirm your choices and click Submit again.

Related Information
Was this page helpful?

Yes

No

find moreaccept