Home > Troubleshooting > Error and Maintenance LEDs
Error and Maintenance LEDs
DSmobile DS-635e/DSmobile DS-640e/DSmobile DS-740De
The LED indications on the control panel are explained in this table.
| Power/Scan LED | Description |
|---|
| | The LED is off. |
| | The LED is lit in the color shown. |
| | The LED is blinking in the color shown. |
| Power/Scan LED | Machine Status |
|---|
| | Document Jam Clear the document jam. If scanning a long document, select Long Paper from the Scan Size or Document Size drop-down list. When inserting an embossed card, make sure to insert it embossed side up into the Feeder Slot. |
| Top Cover Open The Top Cover is open. Close the Top Cover. |
| Insufficient Storage Space When using the Scan to PC function, there may not be enough memory in the destination folder for the scanned data. Press START/STOP to clear the error. Make sure that there is enough space in the destination folder to save the scanned data. |
![]() | Updating the Firmware Firmware update in progress. Wait for the update to complete. |
DSmobile DS-940DWe
The LED indications on the control panel are explained in this table.
| Error LED | SD Card LED | Wi-Fi LED | Battery LED | Power/Scan LED | Description |
|---|---|---|---|---|
| | | ![]() | ![]() | | The LED is off. |
| | | ![]() |
![]() ![]() | | The LED is lit in the color shown. |
![]() | ![]() | ![]() |
![]()
![]() | | The LED is blinking in the color shown. |
| | The LED can be off, lit, or blinking in any color. | |||
| Error LED | SD Card LED | Wi-Fi LED | Battery LED | Power/Scan LED | Machine Status |
|---|
![]() | | | | | Document Jam Clear the document jam. If scanning a long document, select Long Paper from the Scan Size or Document Size drop-down list. When inserting an embossed card, make sure to insert it embossed side up into the Feeder Slot. |
| Top Cover Open The Top Cover is open. Close the Top Cover. |
![]() | ![]() | ![]() | ![]() | | Updating the Firmware Firmware update in progress. Wait for the update to complete. |
![]() | | | | | Insufficient Storage Space When using the Scan to PC function, there may not be enough memory in the destination folder for the scanned data. Press START/STOP to clear the error. Make sure that there is enough space in the destination folder to save the scanned data. |
![]() | | ![]() | | | Access Error Scan to PC The USB cable is not connected to the machine. Connect the USB cable. |
![]() | | ![]() | | | Access Error Scan to PC If your machine is connected via a network, you must configure the Scan Destination setting using Web Based Management. |
![]() | | ![]() (blinking slowly) | | | Wireless Network Connection Error Press START/STOP to clear the error. Confirm the network settings. |
![]() (blinking slowly) | ![]() (blinking rapidly) | ![]() | | | Unsupported Memory Card An unsupported memory card is inserted into the Memory Card Slot.
|
![]() | ![]() (blinking rapidly) | ![]() | | | Too Many Files on the Memory Card Your machine cannot save files to a memory card if the card contains too many files. Press START/STOP to clear the error. Remove the microSD memory card, and then do one of the following:
|
| | | | ![]() | | Battery Error Battery error has occurred.
|
| | | | ![]() | | No Battery Reinstall the battery. |
| | | ![]() | | | Global Network Detection Error (The Wi-Fi LED and Power/Scan LEDs blink alternately every second.) The machine was connected to the global network and assigned a global IP address.
You can disable this notification function in Web Based Management. See Related Information: Enable/Disable Global IP Address Detection. |















