Home > Network > Network Features > Reset the Network Settings to Factory Default
Reset the Network Settings to Factory Default
You can use your machine's control panel or Web Based Management to reset the machine's network settings to its default factory settings. This resets all information, such as the password and IP address.
This feature restores all wired and wireless network (supported models only) settings to the factory settings.
ADS-4300N
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
- Go to the navigation menu, and then click .Start from , if the navigation menu is not shown on the left side of the screen.
- Click Reset under Network.The reset confirmation message is displayed.
- Click Yes to restart your machine.To reset the network settings to factory default using machine's control panel, open the Front Cover, and then press and hold (Scan to USB) for five seconds.
ADS-4700W/ADS-4900W
- Press .The reset confirmation message is displayed.
- Press [OK] for two seconds.The machine will restart.
Did you find the information you needed?