主頁 > 適用於 Windows 和 Mac 的 Brother iPrint&Scan > 使用 Brother iPrint&Scan 設置掃描到工作流程設定
使用 Brother iPrint&Scan 設置掃描到工作流程設定
必須滿足以下條件才能使用「掃描到工作流程」:
- Windows
- 已安裝掃描器驅動程式。
已從 support.brother.com 下載並安裝驅動程式。
- 已從機器中設置掃描的預設設定。
遵循機器掃描設定螢幕上的說明設置設定。
- Mac
- 已安裝iPrint&Scan Push Scan Tool。
從 support.brother.com 下載并安裝iPrint&Scan Push Scan Tool。
- 已從機器中設置掃描的預設設定。
在 Brother iPrint&Scan 首頁畫面中,按一下
并儲存(若適用)。遵循螢幕上的說明完成該過程。
建立工作流程
- 在 Brother iPrint&Scan 首頁畫面中,按一下建立工作流程。
- 遵循螢幕上的說明建立工作流程。
設置工作流程
- 在 Brother iPrint&Scan 首頁畫面中,按一下 。
- 選擇在機器上按「工作流程」按鍵時要顯示的工作流程,然後按一下確定。
編輯或刪除工作流程
- 在 Brother iPrint&Scan 首頁畫面中,按一下
。
- 選擇要編輯或刪除的工作流程,然後按一下編輯或刪除。
此頁對您有幫助嗎?