Replace the Pick-up Roller

Your machine is equipped with a scan counter. The counter automatically counts how many pages the machine has scanned. When the machine has scanned 50,000 pages, it will display a message on the Status Monitor to remind you to replace the Pick-up Roller.

Open the Top Cover (1) and the Front Cover (2).

Hold both sides of the Pick-up Roller Cover (1) and then pull the cover down.

Slide the Pick-up Roller (1) to the right edge.

The holder of the Pick-up Roller has a narrow opening that is designed to avoid dropping the roller, the shape of the shaft of the Pick-up Roller matches the opening. Turn the Pick-up Roller around until the shape of the shaft matches the opening of the holder.

Hold and pull the Pick-up Roller out of the machine.

Place a new Pick-up Roller into the machine.

Note

Confirm the left and right sides of the Pick-up Roller before installing it.

Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller.

Close the Pick-up Roller Cover.

Close the Front Cover and the Top Cover.

Reset the counter (see Reset the Usage Counters).

Note

Confirm the following items:

•	The value of Pick-up Roller Count is 0 (see Check Consumable Replacement Cycle (Windows^®) or Check Consumable Replacement Cycle (Macintosh)).
•	There is no error message showing on the Status Monitor.
•	The LEDs do not indicate Replace Pick-up Roller or Replace Separation Pad and Pick-up Roller (see LED Indications).

Page Top