Home PrintPrevious Next

Replace the Separation Pad

Your machine is equipped with a scan counter. The counter automatically counts how many pages the machine has scanned. When the machine has scanned 50,000 pages, it will display a message on the Status Monitor to remind you to replace the Separation Pad.
1
Open the Top Cover (1) and the Front Cover (2).
Graphic
2
Press and hold the buttons (1) on the inner side of the Front Cover and then pull the Separation Pad Cover (2) down.
Graphic
CAUTION CAUTION
DO NOT touch the metal part of the Separation Pad Cover. Doing this may cause injury to you and serious damage to the machine.
Graphic
3
Press and hold the green buttons (1) of the Separation Pad and then pull the Separation Pad (2) upward.
Graphic
4
Attach a new Separation Pad into the Separation Pad Cover.
Graphic
5
Close the Separation Pad Cover until it clicks.
6
Close the Front Cover and the Top Cover.
7
Reset the counter (see Reset the Usage Counters).
Note Note
Confirm the following items:
•
The value of Separation Pad Count is 0 (see Check Consumable Replacement Cycle (Windows®) or Check Consumable Replacement Cycle (Macintosh)).
•
There is no error message showing on the Status Monitor.
•
The LEDs do not indicate Replace Separation Pad or Replace Separation Pad and Pick-up Roller (see LED Indications).
Page Top
Home PrintPrevious Next