Applying Setting Changes to Multiple Printers

After applying settings to the first printer, disconnect the printer from the computer, and then connect the second printer to the computer.

Select the newly connected printer from the [Printer] drop-down box.

Note

If the [Automatically detects the connected printer, and retrieves the current settings.] check box in the [Option Settings] dialog box is selected, the printer connected with the USB cable is automatically selected.

For details, see File menu.

Click the [Apply] button.

The same settings that were applied to the first printer are applied to the second printer.

Note

If the [Automatically restart the printer after applying new settings.] check box is cleared, the printers will not be restarted after the settings are changed, reducing the time required to configure the printers. However, we recommend selecting the [Automatically restart the printer after applying new settings.] check box when configuring the first printer so that you can confirm that a connection with the access point can be correctly established with the settings. For details, see File menu.

Repeat steps 1 - 3 for all the printers whose settings you wish to change.

Important

If the IP address is set to [STATIC], the printer’s IP address will also be changed to the same address as the first printer.
Change the IP address if necessary.

Note

To save the current settings in a file, click [File] - [Export].
The same settings can be applied to another printer by clicking [File] - [Import], then selecting the exported settings file. (See File menu.)

Page Top