When Your Android™ Device Does Not Support NFC (Near Field Communication)

1	If the Wi-Fi lamp is not lit, press and hold the Wireless Mode button for one second to turn on the wireless LAN function. After the Wi-Fi lamp is lit, release the button. The Wi-Fi lamp flashes.
2	For Windows Start the Printer Setting Tool on your computer, and click the [Communication settings] button. Confirm that the [Enable Wireless Direct when Wireless LAN is turned on] checkbox is selected in the [General] tab of the Communication settings. (This is selected as the factory default.) See Using the Communication Settings for details on the Communication settings. For Macintosh Start the P-touch Utility with your computer, and confirm that [Wireless Direct] is set to [ON] in the [Wireless Direct] tab. See Brother P-touch Utility (for Macintosh) for details on the P-touch Utility.
3	Start one of the Brother applications for mobile devices with your Android™ device and tap . (See Available Applications for Use with Android™ Devices.) Select a printer from the displayed list.

Note

•	The factory default SSID and password are as follows: SSID: “DIRECT-brPT-P750W**” where “**” is the last four digits of the product serial number. (You can find the serial number label by opening the cassette cover.) Password (Network key): 00000000
•	If you changed the password using the Communication settings, you must enter it after selecting the printer.
•	If you want to print the SSID and password, press the Wireless Mode button twice. (Use 24 mm tape.)
•	You can also connect the P-touch to an Android™ device in the infrastructure mode via a WLAN access point/router.