Home > Appendix > Optional Accessories > Charging Cradle (Optional: PA-CR-002A) > Charging Cradle Overview (Optional: PA-CR-002A)
Charging Cradle Overview (Optional: PA-CR-002A)
Parts Description
| Charging Cradle  | Charging Cradle Terminal Attachment  | Screws (2)  |
- Charging Cradle Terminals
- Eject Button
- DC Connector
- USB Port
(Allows to print from a mobile device or a computer by connecting it to the Charging Cradle using a USB cable.)
Specifications
| Charging time | About 4 hours *1
|
| Charging temperature | From 5°C to 35°C |
| Operating temperature | AC adapter: From -10°C to 40°C Car adapter: From -10°C to 50°C |
| Operating humidity | From 10% to 90% (without condensation) |
*1
Varies depending on the operating environment and the condition of the rechargeable Li-ion battery.
- NOTE
-
- The Charging Cradle can be used without a rechargeable Li-ion battery as a power supply or for printing.
- Do not turn on the printer and the Charging Cradle simultaneously.
- Sequential printing and the mass storage mode are not supported when the Charging Cradle is used to print.
- When the printer is placed on the Charging Cradle, we recommend using the After one page of data is received setting in the Other tab of the printer driver properties before printing.
Did you find the information you needed?