Search

Site Map

Home > Appendix > Optional Accessories > Single Active Docking Station (Optional: PA-CR-005) > Connect the Printer to a Wired LAN Network via Single Active Docking Station

Connect the Printer to a Wired LAN Network via Single Active Docking Station

Use an Ethernet (LAN) connection to configure your printer and upgrade its firmware.

image
NOTE
Make sure that the Ethernet (LAN) cable is fully inserted in the Ethernet (LAN) Port.

LED Indicators

image
  1. Ethernet (LAN) LED
    LED Indicator
    Status
    image

    Ethernet (LAN) not connected

    image
    • Ethernet (LAN) connected
    • Receiving or sending data via Ethernet (LAN)
    NOTE
    The Ethernet (LAN) LED does not light up unless the printer is placed on the Single Active Docking Station.
  2. Status LED
    LED Indicator
    Status
    image
    The printer is placed on the Single Active Docking Station and the battery is fully charged.
    image
    The printer is charging on the Single Active Docking Station.

Interface compatibility

Use the [WLAN] and [Wired LAN] menus to select WLAN, Wired LAN, or no connection when the printer is on the Single Active Docking Station.

Cradle LAN Setting

WLAN Setting

Connection type when using the Single Active Docking Station

On
On
WLAN →Wired LAN *1
On
Off
Wired LAN
Off
On
WLAN
Off
Off

No connection enabled

*1
Wireless Direct function is not affected.
Related Information
Did you find the information you needed?

find moreaccept