Specifications
Printing
Printing Technology | Direct Thermal |
Print Resolution | 203 dpi |
Print Speed (depending on the media used) | Maximum 5 ips (127 mm/s) *1 Maximum 5 ips (127 mm/s) (When the Label Peeler is used.) Maximum 3 ips (76.2 mm/s) (When the Linerless Platen Upgrade is used.) |
Maximum Print Width | 2.8" (72 mm) |
Maximum Print Length | 118.11" (3000 mm) |
Minimum Print Length | 0.5" (12.7 mm) |
Using Brother's print test data (10% coverage, 2.99" × 1.14" (76 mm × 29 mm)) at 73.4°F (23°C) when performing continuous printing using a USB connection with a new, fully-charged battery.
Printer Size
Weight (including the battery) | Approximately 1.78 lb (807 g) |
Dimensions | Approximately 4.6" (W) x3" (H) x 7.1" (D) (117 mm (W) x 77 mm (H) x 180 mm (D)) |
Interface
USB | USB Ver.2.0 (Full Speed) (Type C) |
Bluetooth | Bluetooth Ver.5.0 SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy) Supported protocol: iAP |
Ethernet | 10 or 100 Mbps Ethernet (Enabled automatically when the printer is placed on the Active Docking Station) |
Wireless LAN (5 GHz) | IEEE 802.11 a/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode) |
Wireless LAN (2.4 GHz) | IEEE 802.11 b/g/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode) IEEE 802.11 g/n, 802.11d, 802.11i (Wireless Direct mode) |
Protocol (IPv4) | ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client |
Protocol (IPv6) | NDP, RA, DNS Resolver, mDNS, LLMNR responcer, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client |
Network Security (Wired) | SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS) SNMPv3, 802.1x (EAP-MD5, EAP-FAST, PEAP, EAP-TLS, EAP-TTLS) |
Network Security (Wireless) | SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS) SNMPv3, 802.1x (EAP-FAST, PEAP, EAP-TLS, EAP-TTLS) |
Wireless Network Security | WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), WPA3-SAE (AES) |
Wireless Certification | Wi-Fi Certification Mark License (WPA™/WPA2™/WPA3™ - Enterprise, Personal), Wi-Fi Protected Setup™ (WPS) Identifier Mark License |
Environment
Operating Temperature | Operation: Battery: From -4°F to 131°F (From -20°C to 55°C) AC Adapter (Optional): From 14°F to 104°F (From -10°C to 40°C) Car Adapter (Optional): From 14°F to 122°F (From -10°C to 50°C) From -4°F to 131°F (From -20°C to 55°C) (When no accessories are used.) (Recommended Temperature is from 32°F to 104°F (from 0°C to 40°C)) From 14°F to 95°F (From -10°C to 35°C) (When the Label Peeler is used.) From 50°F to 86°F (From 10°C to 30°C) (When the Linerless Platen Upgrade is used.) Charging: From 32°F to 104°F (From 0°C to 40°C)(Recommended Temperature is from 41°F to 95°F (from 5°C to 35°C)) If the internal temperature of the battery is out of this range, charging may stop. |
Operating Humidity | From 10% to 90% (without condensation) 50% (When the Label Peeler/Linerless Platen Upgrade is used.) |
Power Supply
Battery | Rechargeable Li-ion battery: 7.2 V |
AC Adapter (Optional) | AC Adapter (15 V) |
Car Adapter (Optional) | Car Adapter or Wired type (12 V (DC)) |
Maximum number of printed labels *1 | 15,000 |
Charging time | About 3 hours |
Using Brother's print test data (10% coverage, 2.99" × 1.14" (76 mm × 29 mm)) at 73.4°F (23°C) when performing continuous printing using a USB connection with a new, fully-charged battery.
Media Specification
The media material may affect the print quality.
In order to achieve optimum print results, we recommend using genuine Brother media.
Media Type | Receipt, Gap/Black mark Label, Tag, Linerless (Optional) |
Media Width | From 1" to 3.14" (From 25.4 mm to 80 mm) |
Thickness | Receipt: From 2.2 mil to 3.5 mil (From 0.058 mm to 0.090 mm) Tag: From 3.5 mil to 5.5 mil (From 0.090 mm to 0.140 mm) Label: From 3.1 mil to 6.6 mil (From 0.080 mm to 0.170 mm) |
Roll Outside Diameter (maximum) | 2.6" (66 mm) |
Media Roll Holder Core Diameter | Standard (Black): 0.5"- 0.51" (12.7 mm - 13 mm) or 0.75" (19 mm) (Default: 0.75" (19 mm)) In-box (Light Gray): 1.375" (34.9 mm) Optional (Gray): 1" (25.4 mm) Optional (Black): 0.48"- 0.51" (12 mm - 13 mm) |
Media Sensor | Transmissive, Reflective |
Compatible Operating Systems
For the latest list of compatible software, visit support.brother.com.