RJ-3250WB

Specificaţii

Printing

Printing Technology	Direct Thermal
Print Resolution	203 dpi
Print Speed (depending on the media used)	Maximum 5 ips (127 mm/s) *1 Maximum 5 ips (127 mm/s) (When the Label Peeler is used.) Maximum 3 ips (76.2 mm/s) (When the Linerless Platen Upgrade is used.)
Maximum Print Width	2.8" (72 mm)
Maximum Print Length	118.11" (3000 mm)
Minimum Print Length	0.5" (12.7 mm)

Using Brother's print test data (10% coverage, 2.99" × 1.14" (76 mm × 29 mm)) at 73.4°F (23°C) when performing continuous printing using a USB connection with a new, fully-charged battery.

Printer Size

Weight (including the battery)	Approximately 1.78 lb (807 g)
Dimensions	Approximately 4.6" (W) x3" (H) x 7.1" (D) (117 mm (W) x 77 mm (H) x 180 mm (D))

Interface

USB	USB Ver.2.0 (Full Speed) (Type C)
Bluetooth	Bluetooth Ver.5.0 SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy) Supported protocol: iAP
Ethernet	10 or 100 Mbps Ethernet (Enabled automatically when the printer is placed on the Active Docking Station)
Wireless LAN (5 GHz)	IEEE 802.11 a/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode)
Wireless LAN (2.4 GHz)	IEEE 802.11 b/g/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode) IEEE 802.11 g/n, 802.11d, 802.11i (Wireless Direct mode)
Protocol (IPv4)	ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Protocol (IPv6)	NDP, RA, DNS Resolver, mDNS, LLMNR responcer, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Network Security (Wired)	SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS) SNMPv3, 802.1x (EAP-MD5, EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)
Network Security (Wireless)	SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS) SNMPv3, 802.1x (EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)
Wireless Network Security	WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), WPA3-SAE (AES)
Wireless Certification	Wi-Fi Certification Mark License (WPA™/WPA2™/WPA3™ - Enterprise, Personal), Wi-Fi Protected Setup™ (WPS) Identifier Mark License

Environment

Operating Temperature

Operation:

Battery: From -4°F to 131°F (From -20°C to 55°C)

AC Adapter (Optional): From 14°F to 104°F (From -10°C to 40°C)

Car Adapter (Optional): From 14°F to 122°F (From -10°C to 50°C)

From -4°F to 131°F (From -20°C to 55°C) (When no accessories are used.) (Recommended Temperature is from 32°F to 104°F (from 0°C to 40°C))

From 14°F to 95°F (From -10°C to 35°C) (When the Label Peeler is used.)

From 50°F to 86°F (From 10°C to 30°C) (When the Linerless Platen Upgrade is used.)

Charging:

From 32°F to 104°F (From 0°C to 40°C)(Recommended Temperature is from 41°F to 95°F (from 5°C to 35°C))

If the internal temperature of the battery is out of this range, charging may stop.

Operating Humidity

From 10% to 90% (without condensation)

50% (When the Label Peeler/Linerless Platen Upgrade is used.)

Power Supply

Battery	Rechargeable Li-ion battery: 7.2 V
AC Adapter (Optional)	AC Adapter (15 V)
Car Adapter (Optional)	Car Adapter or Wired type (12 V (DC))
Maximum number of printed labels *1	15,000
Charging time	About 3 hours

Using Brother's print test data (10% coverage, 2.99" × 1.14" (76 mm × 29 mm)) at 73.4°F (23°C) when performing continuous printing using a USB connection with a new, fully-charged battery.

Media Specification

The media material may affect the print quality.

In order to achieve optimum print results, we recommend using genuine Brother media.

Media Type	Receipt, Gap/Black mark Label, Tag, Linerless (Optional)
Media Width	From 1" to 3.14" (From 25.4 mm to 80 mm)
Thickness	Receipt: From 2.2 mil to 3.5 mil (From 0.058 mm to 0.090 mm) Tag: From 3.5 mil to 5.5 mil (From 0.090 mm to 0.140 mm) Label: From 3.1 mil to 6.6 mil (From 0.080 mm to 0.170 mm)
Roll Outside Diameter (maximum)	2.6" (66 mm)
Media Roll Holder Core Diameter	Standard (Black): 0.5"- 0.51" (12.7 mm - 13 mm) or 0.75" (19 mm) (Default: 0.75" (19 mm)) In-box (Light Gray): 1.375" (34.9 mm) Optional (Gray): 1" (25.4 mm) Optional (Black): 0.48"- 0.51" (12 mm - 13 mm)
Media Sensor	Transmissive, Reflective