1.

How to use the Multi-purpose Screwdriver. [ Position “2” ]

2.

The App shows the message "No Supported Machines Found".

3.

The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.

4.

How to use the Multi-purpose Screwdriver. [ Position “3” ]

5.

List of Error messages for My Design Snap

6.

The App shows the message "The sheet could not be detected. Make sure that the sheet and mobile device are level."

7.

How do I get a lens calibration sheet?

8.

"The wireless security information (Authentication method, Encryption method, Network Key) is incorrect." message appears on the LCD. What does it mean?

9.

"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?

10.

Cannot lower the embroidery foot with the presser foot lever.

11.

Bobbin thread does not wind neatly on the bobbin.

12.

"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?

13.

"Attach the embroidery frame." message appears on the LCD. What does it mean?

14.

Embroidery

15.

"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?

16.

"The safety device was activated since the main shaft motor seized. Is the thread tangled?" message appears on the LCD. What does it mean?

17.

How to find the security information (SSID and network key) for your home network

18.

Cannot thread the needle.

19.

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

20.

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

21.

How do I attach or remove the Embroidery Unit?

22.

"USB media error" message appears on the LCD. What does it mean?

23.

"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?

24.

"OK to revert to previous color changes?" message appears on the LCD. What does it mean?

25.

"The bobbin thread is almost empty." message appears on the LCD. What does it mean?

26.

"Change to a larger embroidery frame." message appears on the LCD. What does it mean?

27.

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

28.

"Select a pattern." message appears on the LCD. What does it mean?

29.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

30.

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?