FAQs & Troubleshooting
![]() |
Popular |

FAX-T104
33 Results
1.
How can I clear the "PAPER JAM" error message?
2.
How do I improve the copy or fax quality?
3.
Can I confirm that the FAX was sent correctly?
4.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
5.
I have a telephone answering device (TAD) on the same line as my FAX. Is necessary to record a 5 second pause before my outgoing message begins?
6.
How do I set up an answering machine (TAD) to work on the same line as the fax?
7.
How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?
8.
Can I connect my External Answering Device in another room and still receive faxes?
9.
What does the pseudo-ring (double ring) indicate in the F/T Mode?
10.
I am experiencing problems sending a fax, what can I do?
11.
What does "NG" on the Transmission Verification Report mean?
12.
Can I print from or scan to Android™ Smartphone?
13.
Can I print from and scan to iPhone, iPod touch and iPad?
14.
My Brother machine has no power.
15.
"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?
16.
I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?
17.
Can I print a report that will show a listing of faxes I sent and received?
18.
How do I know which receive mode to select?
19.
When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
20.
Vertical streaks appear in my copies.
21.
Do I need a telephone line to send and receive faxes with my Brother machine?
22.
I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
23.
I have an external telephone answering device (TAD) connected to my FAX, have the answer mode set for TAD and the Ring Delay set to zero. Why does my answering machine still pick up when receiving a fax call?
24.
How do I replace the ribbon? (Ribbon Empty -Reset or Replace)
25.
How does the "FAX/TEL" Mode work?
26.
Why can't I copy or send? All the keys just beep 3 times.
27.
What does it mean if the fax machine rings its pseudo-ring/ double-ring (F/T RING TIME) and there is not a voice call?
28.
How do I print the received faxes that are stored in memory? (Fax Storage)
29.
How do I program the date and time?
30.
Why are my sent faxes always received with a black vertical line down the page?