FAQs & Troubleshooting

Close

HL-4050CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-4050CDN

Not your product?

Date: 01/27/2014 ID: faq00000307_006

"JAM TRAY1", "JAM TRAY2" error message appears on the LCD. What should I do?

Note: The LCD names for the paper trays are as follows.

 Tray type  Tray name
 Standard paper tray  TRAY1
 Optional Lower tray:
 * It is available for HL-4050CDN and HL-4070CDW only.
 TRAY2

 

If a paper jam occurs inside the paper tray, follow these steps:

 

  1. Pull the paper tray completely out of the printer.
  2. Use both hands to slowly pull out the jammed paper.
  3. Put paper below the maximum paper mark. While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

     

  4. Put the paper tray firmly back in the printer.

     

  5. Open the front cover and close it to resume printing.

     

    DO NOT take out the standard paper tray while paper is feeding from a lower paper tray as this will cause a paper jam.

     
 

Related FAQs

Related Models

HL-4040CN, HL-4050CDN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.