HL-S7000DN
Odpowiedzi na często zadawane pytania i rozwiązywanie problemów |
HL-S7000DN
Data: 02/11/2012 Identyfikator: faq00003007_000
Jam C Inside
Please follow the steps below to clear the error message "Jam C Inside".
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Remove any printed pages from the output paper tray.
- Pull the top cover release lever (1) as shown and open the top cover.
- Slowly pull the paper tray out until it stops. Then slightly lift the front of the tray and pull the tray out of the machine.
- Open the MP tray and lower it gently.
- Pull both green paper roller tabs toward you to release the paper.
- Hold the left and right edges of the jammed paper near the inside of the machine and pull it out.
- Remove the jammed paper from the machine.
DO NOT touch the parts shown in the illustrations. If you do so, the ink may stain your skin.
- Push both the green paper roller tabs toward the back.
- Close the MP tray.
- Put the paper tray firmly back in the machine.
- Close the top cover.
Powiązane odpowiedzi na często zadawane pytania
Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:
Opinie dotyczące treści
Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.
Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?
Krok 2: Czy chcesz dodać własne komentarze?
Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.