Veelgestelde vragen en probleemoplossing

Sluiten

MFC-J870DW

Veelgestelde vragen en probleemoplossing

Veelgestelde vragen en probleemoplossing

MFC-J870DW

Niet uw product?

Datum: 03-06-2013 Nummer: faq00002192_010

I configured the "IP Config" method of the machine to "Auto" to assign an IP address automatically, however it was changed to "Static" unexpectedly. I get an error message that indicates IP address is not unique, or a document is printed out by the machine I didn't expected.

When wireless network connection is unstable and the APIPA protocol is enabled, you might experience this difficulty.

Follow these steps below to set the BOOT method back to AUTO and disable the APIPA protocol.


  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow to display Network. (This step might be skipped in some models.)

  4. Press Network.

  5. Press the Up or Down arrow to display WLAN. (This step might be skipped in some models.)

  6. Press WLAN.

  7. Press the Up or Down arrow to display TCP/IP. (This step might be skipped in some models.)

  8. Press TCP/IP.

  9. Press the Up or Down arrow to display BOOT Method. (This step might be skipped in some models.)

  10. Press BOOT Method.

  11. Press the Up or Down arrow to display Auto. (This step might be skipped in some models.)

  12. Press Auto.

  13. Press the Up or Down arrow to display APIPA. Press APIPA.

  14. Press Off.

  15. Press Home(Home).

Verwante modellen

DCP-9015CDW, DCP-9020CDW, DCP-J552DW, DCP-J562DW, DCP-J752DW, DCP-J785DW, MFC-9330CDW, MFC-9340CDW, MFC-J4510DW, MFC-J4710DW, MFC-J6520DW, MFC-J6720DW, MFC-J6920DW, MFC-J6925DW, MFC-J870DW, MFC-J880DW, MFC-J985DW

Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.

Feedback

Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?

Dit formulier is alleen bedoeld voor feedback.

Verzenden