MFC-9440CN
Preguntas frecuentes y Solución de problemas |
MFC-9440CN
Fecha: 25/07/2019 ID: faq00000006_021
Vertical colored streaks or bands appear on the page.
Please check the following points:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
> Click here to see how to clean the scanner glass strip.
-
Clean all four corona wires (one for each color) of the drum unit by sliding the green tab.
> Click here to see how to clean the corona wires.
-
Make sure each corona wire's green tab is at the home position.
-
One of the toner cartridges may be damaged. Replace the toner cartridge that matches the color of the streak or band.
> Click here to see how to replace the toner cartridge.
-
The drum unit may be damaged. Put in a new drum unit.
> Click here to see how to replace the drum unit.
- The fuser unit may have a smudge mark. Contact our Customer Service Center.
DCP-9040CN, MFC-9440CN, MFC-9450CDN
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.