FAQs & Troubleshooting

Close

HL-4150CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-4150CDN

Not your product?

Date: 16.06.2010 ID: faq00000023_004

Adjust the print position of each color.

There are two ways to adjust the print position of each color.

Auto Registration:

  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Auto Regist.. Press OK.
  3. Press OK to choose Registration.
  4. Press + to choose Yes.


Manual Registration:

When you manually set the color registration, you need to print the color registration chart first.
  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Manual Regist.. Press OK.
  3. Press + or - to choose Print Chart. Press OK. The color registration chart will be printed.

Then you can correct the color registration manually. 

  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Manual Regist.. Press OK.
  3. Press + or - to choose Set Registration. Press OK.
  4. Set the color registration in accordance with the instruction on the color registration chart.
  5. Press OK.

Related FAQs

Related Models

HL-4150CDN, HL-4570CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.