HL-4150CDN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 16.06.2010
  • ID: faq00000023_004

Adjust the print position of each color.

There are two ways to adjust the print position of each color.

Auto Registration:

  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Auto Regist.. Press OK.
  3. Press OK to choose Registration.
  4. Press + to choose Yes.


Manual Registration:

When you manually set the color registration, you need to print the color registration chart first.
  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Manual Regist.. Press OK.
  3. Press + or - to choose Print Chart. Press OK. The color registration chart will be printed.

Then you can correct the color registration manually. 

  1. Press + or - to choose Color Correction. Press OK.
  2. Press + or - to choose Manual Regist.. Press OK.
  3. Press + or - to choose Set Registration. Press OK.
  4. Set the color registration in accordance with the instruction on the color registration chart.
  5. Press OK.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4150CDN, HL-4570CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit