FAQs & Troubleshooting

Close

HL-S7000DN

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-S7000DN

Not your product?

Date: 02/11/2012 ID: faq00003006_000

Jam B Inside

Please follow the steps below to clear the error message "Jam B Inside".

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.


  1. Remove any printed pages from the output paper tray.

  2. Pull the top cover release lever (1) as shown and open the top cover.

    Open the top cover.

  3. Slowly pull the paper tray out until it stops. Then slightly lift the front of the tray and pull the tray out of the machine.

    Pull the paper tray out.

  4. Open the MP tray and lower it gently.

    Open the MP tray and lower it gently.

  5. Pull both green paper roller tabs toward you to release the paper.

    Pull paper roller tabs toward you to release the paper.

  6. Open the inside front cover.

    Open the inside front cover.

  7. Using both hands, gently pull out the jammed paper.

    Gently pull out the jammed paper.

  8. Close the inside front cover.

  9. Push both the green paper roller tabs toward the back.

    Push paper roller tabs toward the back.

  10. Close the MP tray.

  11. Put the paper tray firmly back in the machine.

  12. Close the top cover.

Related FAQs

Related Models

HL-S7000DN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.