PT-E550W
FAQ & Fehlerbehebung |
PT-E550W
Datum: 18.03.2020 Kennnummer: faqp00001475_009
How do I set cut options and what features are they?
The Tape Cutting Options allow you to specify how the tape is fed and cut when printing labels.
They include Full cut (1), Half cut (2), Chain (3) or a combination of the three options.
Follow the steps below to change the Tape Cutting Options:
-
Press the Menu key.
-
Select "Cut Option" using the Up or Down arrow key, and then press the OK or Enter key.
-
Set the value by using the Up or Down arrow key, and then press the OK or Enter key to apply the settings.
- New settings are NOT applied if you do not press the OK or Enter key.
- For Chain printing, the last tape is not cut automatically. Press the Feed & Cut key to feed and cut the tape.
Refer to the table below for a list of all available settings:
Full cut Half cut Chain Image No Yes No Yes Yes No No No No Yes No No No Yes Yes Yes Yes Yes No No Yes Yes No Yes Special tape
PT-E550W, PT-E560BT
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.