To install the software from the CD-ROM, follow the steps below:

(The following is example for Windows Vista)

1. Insert the CD-ROM into your computer's CD-ROM drive. "Setup.exe" will start up automatically.
   If it does not start up, open the files on the CD-ROM and double-click on "Setup.exe".
   Click [Standard Installation].

    

   
2. Read the license agreement and click [Yes] if you agree with the terms and conditions.
    
3. Follow the on-screen instructions.
    
4. Put the check mark in the box to install the Add-in and click [Next].
5. Click [OK].
    
6. Choose your connection method and click [Next].

For USB interface cable users (go to 7)

For Network interface cable users (go to 11)

For shared network printer users (go to 16)

<For USB interface cable users>

7. Choose [Local Printer with USB cable] and click [Next].

    

   
    
8. Follow the on-screen instructions.
   When this screen appears, make sure to turn on the power.
   Connect the USB interface cable to your computer, and then connect it to the machine.
    
    
9. Click [Next]. Choose "Yes" or "No" if you will go to the online user registration page.
    
10. Click [Finnish] and start the software.

<For Network interface cable users>

11. Choose [Brother Peer-to-Peer Network Printer], and then click [Next]. Check that the machine is connected to the network by a LAN cable.

     

     

     

12. Choose [Search the network for devices and choose from a list of discovered devices (Recommended)]. Or enter your machine's IP address or its node name. Click [Next]. You can find your printer's IP address and the node name by printing out the Printer Settings Page.


13. Choose your printer.


14. Click [Next]. Choose "Yes" or "No" if you will go to the online user registration page.


15. Click [Finnish] and start the software.

<For shared network printer users>

16. Choose [Network Shared Printer], and then click [Next].

     

    

     

17. Click [Next]. Choose "Yes" or "No" if you will go to the online user registration page.
     
18. Click [Finish] and start the software.