HL-3045CN
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hl3045cn_us_as.jpg)
HL-3045CN
Date: 2012-11-19 ID: faq00000231_041
Envelope creases
![Envelope creases](/g/b/img/faqend/faq00000231_041/us_ot/en/20509/envelope_s.gif)
Please check the following points to solve the problem:
NOTE: Illustrations shown below are from a representative product, and may differ from your Brother machine.
- Check that you use the paper that meets our specification. Click here to see the details of the recommended paper.
- The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.
- Click here to see the details of how to install the drum unit.
- Click here to see the details of how to install the toner cartridges.
- Make sure that the fuser cover (1) inside the back cover is closed properly.
- Make sure that two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are pulled down.
- Make sure that the media type settings in the printer driver match the type of paper you are using.
Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.