HE300
FAQ et Diagnostic |
28 Résultats
Trier par
- 12024-05-20F** or "F*" appears on the LCD. What does it mean?
- 22018-07-02"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 32018-06-04"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 42018-06-04"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 52018-06-04"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 62016-03-31"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 72016-03-31"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 82016-03-31"Saving..." message appearing on the LCD. What does it mean?
- 92016-03-31"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 102016-03-31"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 112016-03-31"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 122016-03-31"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 132016-03-31"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 142016-03-31"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 152016-03-31"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 162016-03-31"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 172016-03-31"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 182015-05-14"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 192015-05-14"Deleting..." message appearing on the LCD. What does it mean?
- 202015-05-14"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 212015-05-14"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 222015-05-14"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 232015-05-14"Selected a pattern." appears on the LCD.
- 242015-05-14"Change to the single needle mode." appears on the LCD.
- 252009-04-07"Lower the presser foot lever." appears on the LCD.
- 262009-04-07"Lower the buttonhole lever." appears on the LCD.
- 272009-04-07"Lift the buttonhole lever." appears on the LCD.
- 282009-04-07"The safety device has been activated." appears on the LCD.