HE300
![]() |
FAQ et Diagnostic |
Trier par
28 Résultats
1. 2024-05-20
F** or "F*" appears on the LCD. What does it mean?
2. 2018-07-02
"Disconnect the foot controller." message appearing on the LCD. What does it mean?
3. 2018-06-04
"Raise presser foot lever." message appearing on the LCD. What does it mean?
4. 2018-06-04
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
5. 2018-06-04
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
6. 2016-03-31
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
7. 2016-03-31
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
8. 2016-03-31
"Saving..." message appearing on the LCD. What does it mean?
9. 2016-03-31
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
10. 2016-03-31
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
11. 2016-03-31
"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
12. 2016-03-31
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
13. 2016-03-31
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
14. 2016-03-31
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
15. 2016-03-31
"Winding bobbin thread." message appearing on the LCD. What does it mean?
16. 2016-03-31
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
17. 2016-03-31
"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
18. 2015-05-14
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
19. 2015-05-14
"Deleting..." message appearing on the LCD. What does it mean?
20. 2015-05-14
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
21. 2015-05-14
"This pattern cannot be used." message appearing on the LCD. What does it mean?
22. 2015-05-14
"OK to save the current settings?" message appearing on the LCD. What does it mean?
23. 2015-05-14
"Selected a pattern." appears on the LCD.
24. 2015-05-14
"Change to the single needle mode." appears on the LCD.
25. 2009-04-07
"Lower the presser foot lever." appears on the LCD.
26. 2009-04-07
"Lower the buttonhole lever." appears on the LCD.
27. 2009-04-07
"Lift the buttonhole lever." appears on the LCD.
28. 2009-04-07
"The safety device has been activated." appears on the LCD.