FAQs & Troubleshooting
![]() |
Popular |
132 Results
- 1How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 2Maximum sewing speed setting
- 3How to Embroider on Clothes. [Video instructions]
- 4How to use the Round frame (PRPRFK1) [Video instructions]
- 5Tutorial videos on how to use the machine [Video instructions]
- 6How to set up the cap frame driver. [Video instructions]
- 7Aligning the embroidering position using the embroidery positioning sticker
- 8How to use the the versatile magnetic frame [Video instructions]
- 9How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 10How to Embroider on Bag. [Video instructions]
- 11How to Embroider on Pet Collar. [Video instructions]
- 12How to Embroider on Cap. [Video instructions]
- 13How to Embroider on Shoes. [Video instructions]
- 14Aligning the embroidering position using the built-in camera
- 15Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 16Maintenance (Cleaning around the needle plate) [ Video ]
- 17Why does the upper thread keep breaking?
- 18How do I thread the machine? (Threading the upper thread)
- 19How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 20How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 21Specifying jumpstitch trimming or DST jump codes for trimming
- 22How do I manually specify or manage the thread colors assigned to each needle bar?
- 23Displaying the fabric on the LCD when aligning the embroidering position
- 24How do I set the machine to trim the threads between the characters?
- 25Maintenance (Cleaning the bobbin case) [ Video ]
- 26Maintenance (Clean the hook) [ Video ]
- 27How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 28Although the thread is not broken, a broken thread error occurs and the machine stops.
- 29"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 30How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 31How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 32"Includes a special pattern that cannot be saved to external memory. Save the pattern in the machine’s memory." message appears on the LCD. What does it mean?
- 33Changing the embroidering position and Adjusting the angle
- 34Temporary needle bar setting
- 35The thread tension is incorrect.
- 36Embroidery pattern does not sew out correctly.
- 37Loops appear on the surface of the fabric when embroidering.
- 38Basting Embroidery
- 39How do I resume embroidering after turning off the machine ?
- 40How to set up the cap frame. [Video instructions]
- 41"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 42How do I check the thread tension ?
- 43"This pattern cannot be used." message appears on the LCD. What does it mean?
- 44"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 45"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 46"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 47How do I change the needle?
- 48Maintenance (Cleaning around the needle plate)
- 49"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 50There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.