TD-2120N

Preguntas frecuentes y solución de problemas

Preguntas frecuentes y solución de problemas

How do I reset network setting?

1. POWER indicator
2. (Power) button
3. Media exit
4. RD/Media Roll compartment top cover
5. STATUS indicator
6. (Feed) button
7. (Print) button
8. Cover release lever
  • To reset network settings and turn APIPA ON

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 2 times.
    4. Release the Power button.
      All network settings will be reset.
  • To reset network settings and turn APIPA OFF

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 4 times.
    4. Release the Power button.
      All network settings will be reset.

APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.0.1 to 169.254.254.254.

¿Ha revisado los manuales?

Si necesita asistencia, contáctese con el servicio al cliente de Brother:

Comentarios sobre el contenido

Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.

Paso 1: ¿Cómo lo ayudó la información en esta página?

Paso 2: ¿Quiere agregar otros comentarios?

Observe que este formulario solo se utiliza para comentarios.