PT-E850TKW
 |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
How to insert a tube
-
Press the cover open button to open the top cover.
-
Pull the tube release lever up.
-
Pass the tube as shown in the illustration so that the end of the tube reaches the “
” mark on the printer, and then push the tube release lever down.
-
Close the top cover.
- When using the printer, position it so direct sunlight does not enter the printer through the tube exit slot.
- For inserting a ribbon cassette, see “How to insert a ribbon cassette”.
-
You can use the tube half-cut adjuster to adjust the depth of half cuts to one of three settings.
For the location of the tube half-cut adjuster, see “The tube is not cut completely.”. -
If the tube is jammed or not cut completely, use the
(Feed and Cut) button to manually cut the tube completely. Press and hold the button for 2 to 10 seconds until the 
(Power) indicator changes from being lit in green to flashing in green, and then release it. The tube will be cut when the button is released.
Movie: How to print on a Tube
*The video clip is being streamed from YouTube.
ส่วนแสดงความคิดเห็น
เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้
