HL-L5100DN

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น

Paper is Jammed in the 2-sided Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps:
  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
  2. Pull the paper tray completely out of the machine.
  3. At the back of the machine, pull the 2‑sided tray completely out of the machine.
  4. Pull the jammed paper out of the machine or out of the 2‑sided tray.
  5. Remove paper that may have jammed under the machine due to static electricity.
  6. If paper is not caught inside the 2-sided tray, open the back cover.
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

  7. Use both hands to gently pull the jammed paper out of the back of the machine.
  8. Close the back cover until it locks in the closed position.
  9. Put the 2-sided tray firmly back in the rear of the machine.
  10. Put the paper tray firmly back in the front of the machine.

คำถามที่พบบ่อยที่เกี่ยวข้อง

หากคำถามของท่านยังไม่ได้รับคำตอบ ท่านได้ลองดูคำถามข้ออื่นๆ แล้วหรือไม่?

ท่านได้ลองดูคู่มือแล้วหรือไม่?

หากท่านต้องการความช่วยเหลือเพิ่มเติม โปรดติดต่อฝ่ายบริการลูกค้าของบราเดอร์

รุ่นที่เกี่ยวข้อง

HL-L5100DN, HL-L6200DW, HL-L6400DW

ส่วนแสดงความคิดเห็น

เพื่อช่วยเราปรับปรุงการให้การสนับสนุน โปรดแสดงความคิดเห็นเพื่อตอบกลับให้เราทราบตามด้านล่างนี้

ขั้นตอนที่ 1: ข้อมูลบนหน้านี้มีประโยชน์กับท่านมากแค่ไหน?

ขั้นตอนที่ 2: ท่านต้องการแสดงความคิดเห็นเพิ่มเติมหรือไม่?

โปรดทราบว่าแบบฟอร์มนี้ใช้สำหรับการแสดงความคิดเห็นตอบกลับเท่านั้น