TD-4650TNWBR
 |
Vanliga frågor & felsökning |
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
-
Turn off the printer.
-
Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED color will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
After the initialization, the following factory settings will be restored:
| Parameter |
Default setting |
| Speed |
76 mm/sec (3 ips) |
| Density |
8 |
| Label Width |
101.5 mm (4") |
| Label Height |
101.5 mm (4") |
| Sensor Type |
Gap sensor |
| Gap Setting |
3 mm (0.12") |
| Print Direction |
0 |
| Reference Point |
0,0 (upper left corner) |
| Offset |
0 |
| Tear Mode |
On |
| Label Peeler off Mode |
Off |
| Cutter Mode |
Off |
| Code Page |
850 |
| Country Code |
001 |
| Clear Flash Memory |
No |
< Printer initialization from the LCD >
You can also activate printer initialization from the LCD.
-
In the LCD, select the Menu icon
.
-
In the Main menu, select Advanced.
-
Select Initialization.
Om du inte fick svar på din fråga, har du tittat på andra Vanliga frågor?
Har du tittat efter i manualerna?
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
