TD-4650TNWBR
Vanliga frågor & felsökning |
TD-4650TNWBR
Datum: 2021-12-01 ID: faqp00100470_001
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
- Turn off the printer.
- Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED color will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
Parameter Default setting Speed 76 mm/sec (3 ips) Density 8 Label Width 101.5 mm (4") Label Height 101.5 mm (4") Sensor Type Gap sensor Gap Setting 3 mm (0.12") Print Direction 0 Reference Point 0,0 (upper left corner) Offset 0 Tear Mode On Label Peeler off Mode Off Cutter Mode Off Code Page 850 Country Code 001 Clear Flash Memory No
< Printer initialization from the LCD >
You can also activate printer initialization from the LCD.
- In the LCD, select the Menu icon .
- In the Main menu, select Advanced.
- Select Initialization.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.