PT-D400
![]() |
Vanliga frågor & felsökning |
The screen ‘locks’, or the printer does not respond normally.
Please reset the printer and reset the internal memory to the initial settings.
To reset the printer, perform the following steps.
- Turn off the printer.
-
While holding the [Shift] key (
/
) and [R] key (
), press the [Power] key (
) once.
-
Finally release the [Shift] key (
/
) and [R] key (
).
If resetting the printer does not solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.