Innov-is XJ2

Vanliga frågor & felsökning

Fabric does not feed through the machine.

Feed dogs are set in the down position.

Press , and then turn the handwheel to raise the feed dogs.

Stitches are too close together.

Lengthen the stitch length setting.
Refer to How do I adjust a stitch width or length?
Wrong presser foot.

Use the correct presser foot.
Needle is turned, bent or the point is dull.

Replace the needle.
Refer to How do I change the needle ?
Thread is entangled.

Cut the entangled thread and remove it from the race.
Zigzag foot J is slanted on a thick seam at the beginning of stitching.

Use the presser foot locking pin (black button on the left side) on zigzag foot J to keep the presser foot level while sewing.
Refer to Tips for sewing thick fabrics.

Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.