Modelo descontinuado. Esta página não será mais atualizada.

HL-1650

Perguntas mais frequentes e Resolução de problemas

Perguntas mais frequentes e Resolução de problemas

ERROR XX <-> SERVICE CALL

When any of the following messages appear on the LCD, turn the printer Off, wait 5 seconds and then turn the printer On again. If the alarm continues, perform a Factory Reset as follows:

 

 

  1. Press the - (minus) button until the screen says Reset Menu. The LCD should be amber.
  2. Press the Set button.
  3. Press the + (plus) or - (minus) button until the LCD says Factory Reset, press Set.
  4. The LCD will say OK? confirming your selection. Press the Set button.
  5. The printer will automatically go to a green Ready on the LCD.

     

    If this does not clear the problem, consult your dealer or our authorized service representative.

     
 

Consultou os manuais?

Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:

Feedback sobre o conteúdo

Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.

Passo 1: Como classifica a utilidade das informações desta página?

Passo 2: Gostaria de acrescentar mais algum comentário?

Tenha em atenção que este formulário é utilizado apenas para feedback.