HL-1650
![]() |
Perguntas mais frequentes e Resolução de problemas |
![](/g/b/img/product/hl1650_all.jpg)
HL-1650
Data: 27-01-2014 ID: faq00000168_001
ERROR XX <-> SERVICE CALL
When any of the following messages appear on the LCD, turn the printer Off, wait 5 seconds and then turn the printer On again. If the alarm continues, perform a Factory Reset as follows:
- Press the - (minus) button until the screen says Reset Menu. The LCD should be amber.
- Press the Set button.
- Press the + (plus) or - (minus) button until the LCD says Factory Reset, press Set.
- The LCD will say OK? confirming your selection. Press the Set button.
-
The printer will automatically go to a green Ready on the LCD.
If this does not clear the problem, consult your dealer or our authorized service representative.
Se precisar de mais ajuda, contacte o serviço ao cliente da Brother:
Feedback sobre o conteúdo
Para nos ajudar a melhorar o nosso suporte, dê-nos abaixo o seu feedback.
Passo 1: Como classifica a utilidade das informações desta página?
Passo 2: Gostaria de acrescentar mais algum comentário?
Tenha em atenção que este formulário é utilizado apenas para feedback.