VC-500W
 |
Ofte stillede spørgsmål og fejlfinding |
I cannot print and get an error message "No cassette is installed" or "NO MEDIA".
If you can not print because an error message is displayed on the printer, check the following.
Is the cassette button's LED lit?
If the roll cassette is installed and the cassette button's LED is off, the printer may not install the roll cassette correctly.
Remove the roll cassette and correctly load it again.
Confirm that the cassette button's LED will stop blinking and will remain lit when resetting the roll cassette.
To learn how to install the cassette, see the FAQ: "How do I load/change the roll cassette?"
Are all three LEDs on the Swipe-To-Cut panel lit or blinking?
The paper printed last time may be left in the print output slot or the paper may be jammed.
To remove the paper, see the FAQ: "The printer does not start printing. Also, all LEDs on the Swipe-To-Cut panel are blinking."
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Relaterede modeller
VC-500W
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
