VC-500W
Ofte stillede spørgsmål og fejlfinding |
VC-500W
Dato: 04-04-2018 Id: faqp00100339_000
I cannot print and get an error message "No cassette is installed" or "NO MEDIA".
If you can not print because an error message is displayed on the printer, check the following.
Is the cassette button's LED lit?
If the roll cassette is installed and the cassette button's LED is off, the printer may not install the roll cassette correctly.
Remove the roll cassette and correctly load it again.
Confirm that the cassette button's LED will stop blinking and will remain lit when resetting the roll cassette.
To learn how to install the cassette, see the FAQ: "How do I load/change the roll cassette?"
Are all three LEDs on the Swipe-To-Cut panel lit or blinking?
The paper printed last time may be left in the print output slot or the paper may be jammed.
To remove the paper, see the FAQ: "The printer does not start printing. Also, all LEDs on the Swipe-To-Cut panel are blinking."
VC-500W
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Bemærk, at denne formular kun bruges til feedback.