MFC-J6710DW
![]() |
常见问题解答与故障排除 |
When I print or copy a document with fast mode, the printing is shifted too high on the paper.
Powder from the paper may build up on the surface of the paper pick-up roller. This may cause the paper to slip as it is picked from the tray. To resolve this issue follow the steps below:
- Clean the paper pick-up roller
- Unplug the machine from the AC power outlet (electrical socket).
- Pull the paper trays completely out of the machine.
- Open the Jam Clear Cover (1) at the back of the machine.
- Clean the Back Paper Feed Rollers (1) with a soft lint-free cloth moistened with water.
Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
Do not touch the metal shaft.
- Close the Jam Clear Cover. Make sure the cover is closed completely.
- Put the paper trays firmly back in the machine.
- Re-connect the power cord.
- Unplug the machine from the AC power outlet (electrical socket).
- Flip the paper in the paper tray
If you are using paper that has a coating on one side (ex. Photo Paper) skip this step.
- Take the paper out of the tray and fan the stack of paper well.
- Install the paper into the paper tray with the other side of paper face up.
- Put the paper tray firmly back in the machine.
- Start copying or printing again.
- Take the paper out of the tray and fan the stack of paper well.
If you still have a problem after performing the previous steps Brother recommends copying or printing your document at a higher resolution (increased resolutions will print your document at slower speeds).
- Change the copy or print quality setting
- for Copy
*If your Brother machine has a touchscreen, please follow the steps of "For Touchscreen models" below.
- Press the Copy button on the machine.
- Press the up or down arrow key to choose Quality.
- Press the right or left arrow key to choose Normal or Best. Press OK.
- Start copying.
- Press the Copy Button on the machine.
- Press the right or left arrow key to display to Quality.
- Press Normal or Best.
- Start copying.
For Windows Users:
- Open Printing Preferences. (Click here to see the details of how to open Printing Preferences.)
- Change the print mode at the Print Quality section. Choose one of the modes Normal, High, Photo or Best.
- Click Apply -> OK
- Open Print dialog. (Click here to see the details of how to open Print dialog.)
- Choose Print Settings in the Print dialog box.
- Click on the drop down menu next to Print Quality.
- Choose one of the modes Normal, High, Photo or Best.
- Press the Copy button on the machine.
内容反馈
请在下方提供您的反馈,帮助我们改进支持服务。